Product name: 10/100 Media converter single/dual fiber

Product Details
10/100M Media Converter
BC-10/100M adaptive Ethernet media converter can interconvert the electric signal of 100Base–TX twisted pair cable and optical signal of 100Base-TX. It extends the network transmission range from 100m to 100Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. There is outside power supply.

Product feature:
Adaptive
BC-10/100M provides the adaptive function of 10/100M rate and full/half duplex, significantly protects the existing network investment during network upgrade.
Mass buffer
Unique buffer technology ensures the excellence of your network in data transmission and multimedia application; the buffer is 2M.

Performance:
Main features:
In conformity with the following
IEEE802.3 10Base-T standard
IEEE802.3U 100Base-TX/FX standard
IEEE802.3X standard

Interface transmission rate:
Optical interface: 100Mbps
Electrical interface: 10/100Mbps

Automatic identification with cross line and through line:
BC-10/100M can use either cross line or through line for connection with the devices such as switch or server.
TX LINK/ACT lamp “On” indicates the correct interconnected link.

Duplex supportive:
BC-10/100M supports full/half duplex adaptive, and 10/100M adaptive.

Network cable:
10/100Base-TX UTP 5
100Base-FX: single mode fiber 9/125?m

Transmission range
10/100Base-TX: 100 m
100Base-FX:
25/40/60/100 km (single mode)

Optical interface feature:
Wavelength:1310nm (25km,40km,2km)
1550nm (100km)

LED display:
PWR: power indicator lamp
FX LINK/ACT: optical link connecting/ active status indicator lamp
TX LINK/ACT: Electrical link connecting/ active status indicator lamp
FX100: optical interface rate indicator lamp
TX100: Electrical interface rate indicator lamp
FDX: full/half duplex indicator lamp

Interface configuration:
One RJ45 10/100Base-TX interface
One SC single mode simplex/duplex connector

Power requirement:
Outside power supply: 5VDC  1A
Power consumption: <5W

Environmental requirement:
Operating temperature range :0C-60C
Storage temperature range: -40C  до +85C
Relative humidity: 5%-90%

Dimensions:
Outside power supply: 26mm x 71mm x 94mm

©2020 Официалния сайт на фирма „АЛЦЕГ“ ООД. All Rights Reserved. Powered by WordPress.

Изработка на сайт: OnboxMedia - Пакет ОМ Старт